Cir-Kit Concepts Dollhouse Lighting, Wiring Kits, Electrical Supplies
Home | Mobile Site |  Log In
 

Electrical Accessories




Product Image Item Name- Price
CK1101 - 1 Amp. Diodes (2 pak)

CK1101 - 1 Amp. Diodes (2 pak)

When connected in series with a dc load such as a locomotive engine, these diodes will have a voltage drop of 0.7 volts each. Two connected in series...
$1.19

Add:

GRS906 - 2-Pin Micro Connectors (1pr. w/5" wires)

GRS906 - 2-Pin Micro Connectors (1pr. w/5" wires)

The GRS906 consists of one female pair and one male pair of connectors with attached color coded wires. Excellent for wire interconnects in tight...
$4.95

Add:

Black Heat Shrink Tubes

Black Heat Shrink Tubes

Use these larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to...
$1.96

... more info

GRS907 - 2-Pin Micro Connectors (2 pr. w/o wires)

GRS907 - 2-Pin Micro Connectors (2 pr. w/o wires)

Same as GRS906 but without wires. Makes either a male or female connector. Insulating heat shrink tubing pieces included. GRS907
$5.95

Add:

Battery Holders

Battery Holders

These battery holders accommodate a wide range of battery sizes and provide numerous output voltage and current configurations. These allow multiple...


... more info

Heat Shrink Tubes

Heat Shrink Tubes

These small shrink tubes provide an excellent means of connecting 32-gauge wires such as GOW bulb wires together without the use of solder. The...
$2.96

... more info

CK1102 Flanged Spade Lugs, Insulated (6 pak)

CK1102 Flanged Spade Lugs, Insulated (6 pak)

The CK1102 spade lugs may be attached to a wide range of 18-24 gauge wire sizes and used for connecting wires either to transformer or terminal block...
$2.50

Add:

CK1026 In-Line Fuseholder

CK1026 In-Line Fuseholder

The CK1026 in-line fuseholder is used in conjunction with the CK1024 series of fuses for system protection. Easily assembled, the fuseholder connects...
$1.75

Add:

Fuses

Fuses

These fuses provide the high-speed action necessary to protect both transformer and lighting fixtures in the event of a short. They may be used as...
$1.50

... more info

CK1048 In-Line Switch

CK1048 In-Line Switch

Use this switch wherever on/off power control is desired. It may be used on either 12 or 115 volt lines with zip type cords between 16 and 20 gauge....
$2.96

Add:

CK1048-1 Small Slide Switch

CK1048-1 Small Slide Switch

Our small SPDT slide switch is well suited for round wire systems involving soldered connections in imbedded locations. It may be located in a wall...
$1.96

Add:

CK1033-1 Solder Spool (4 ft.)

CK1033-1 Solder Spool (4 ft.)

Use this high-quality solder in conjunction with our CK1053 soldering iron for all your soldering needs. The 60% tin, 40% lead alloy composition...
$3.96

Add:

Terminal Blocks

Terminal Blocks

Use these heavy-duty terminal blocks for interconnecting wires of all sizes. Electrical connection exists between opposite screw terminals and one or...


... more info

CK1049-4 Terminal Block Jumpers (6 pak)

CK1049-4 Terminal Block Jumpers (6 pak)

A convenient method of joining terminal block screws together. These jumpers eliminate the need for running wires between screws when fan-out of...
$4.96

Add:

GRS600 - Ultimate Micro Motor

GRS600 - Ultimate Micro Motor

To our knowledge, this is the smallest and most compact motor to be found in the entire hobby industry. If you're looking for a prime mover that...
$20.95

Add:

GRS601 - Micro Motor Controller

GRS601 - Micro Motor Controller

Our GRS601 controller has been designed for our GRS600 Micro Motor but will work on any 1.5-3.0 volt hobby motor drawing up to 300ma of current. The...
$41.95

Add:



Copyright © 2017 Cir-Kit Concepts, Inc.. Designed by Anne Gerdes Web Design